937 / 1452
EXHAUST
TIRES
TUBES /
TIRE ACC.
BODY / FRAME
ACCESSORIES
LUGGAGE /
SEATS
COVERS /
SECURITY
WINDSHIELDS
HANDLEBARS /
CONTROLS
LEVERS /
CABLES
FUEL SYSTEMS
AIR FILTERS
OIL FILTERS
ELECTRICAL
LIGHTING /
GAUGES
BATTERIES /
CHARGERS
ENGINE /
CLUTCHES
SUSPENSION /
BEARINGS
CHAINS / BELTS
SPROCKETS
BRAKING
COMPONENTS
CHINESE
VEHICLE PARTS
CHEMICALS
GAS CANS
TOOLS /
HARDWARE
TRANSPORT /
TRAILER
PROMOTIONAL
REFERENCE
INDEX
x
X X
X
X
937
HC1 RADIAL MASTER CYLINDERS
TECHNICAL DETAILS
• 70° RADIAL DESIGN Pushrod and cylinder at 70° angle to
handlebar results in decreased friction and more direct brake
feeling for improved control.
• FULL ABS COMPATIBILITY MAGURA “HCT” is approved
for continuous use with all ABS systems without loss of
performance due to pressure compensation (ABS-Kickback).
• (Status 01.2016)
• ADVANCED SECONDARY SEAL TECHNOLOGY The
rear piston seal has been specially designed to prevent
the introduction of air through secondary seal ingress. The
advanced X-Ring seal design will reduce or eliminate this
problem common on racing motorcycles at higher RPM.
• RESERVOIR MOUNT The master cylinder is supplied with
an external reservoir and mounting bracket designed to use
minimum space and with smoked glass to optically determine
the level and condition of the brake fluid at all times.
BRAKE MASTER
• Piston diameter 18 mm, long lever blade
• Piston diameter 15 mm, long lever blade
• Piston diameter 12 mm, short lever blade
* Suitable for use with BMW and KTM mineral oil clutch activation systems.
ITEMS INCLUDED WITH DELIVERY EVERY READY-
TO-MOUNT HC1 IS DELIVERED WITH THESE BANJO
BOLT WITH SEALING RINGS (M10X1)
• Remote reservoir
• Standard clamp (without mirror mount)
• Brake light or start safety switch
• ABE for brake fitments
• Owner‘s Manual
Piston
Dia.
Fluid Type WPS# List
HC1 BRAKE M/C
18mm DOT
17-9500 $289.95
15mm DOT
17-9501 288.95
12mm DOT
17-9502 288.95
225 HYDRAULIC BRAKE MASTER CYLINDER
• Black painted housing
• Polished alloy lever
• Thread for switch
• 8.1 mm hole can be threaded to 8mm or
10mm for rear-view mirror
• 22 mm clamp
• Plastic brake fluid reservoir
• For matching Clutch M/C see pg# 431.2
Description
WPS#
List
13mm RH
17-9200
$105.00
16mm RH
17-9201
114.00
Brake Switch
17-9209
11.30
Lever
17-9210
24.00
Pivot Bolt
17-9211
1.00
Pivot Nut
17-9212
1.00
Pivot Sleeve
17-9213
2.00
Dust Boot
17-9214
2.00
BRAKING COMPONENTS