985 / 1600
HELMETS
HELMET
ACCESSORIES
EYEWEAR
APPAREL
PROTECTIVE
SURVIVAL /
BAGS
VIDEOS
SNOWMOBILE
ACCESSORIES
SNOWBIKE
SLEDS /
TRAILERS
ELECTRICAL
EXHAUST
ENGINE
STEERING /
CONTROLS
AIR /FUEL
WINDSHIELDS
BODY
TUNNEL /RAIL
ACCESSORIES
TRACKS /STUDS /
SPROCKETS
REAR
SUSPENSION
SHOCKS
FRONT
SUSPENSION
SKIS /
RUNNERS
BRAKES
CHAIN /
SPROCKETS
BELTS
CLUTCHING
CHEMICALS
TOOLS /
FASTENERS
PROMOTIONAL
REFERENCE
INDEX
x
X X
X
X
985
NO SLIP COMBO SPROCKETS
Drives against involute
lugs and open windows
REQUIRES A FULLY CLIPPED TRACK THAT HAS ALL WINDOWS OPEN
SPROCKET DIAMETER (WITHOUT KNOBS)
2.52” 7 Tooth 5.48”
8 Tooth
6.26”
9 Tooth 7.05”
10 Tooth
7.83”
2.86” 7 Tooth 6.24”
8 Tooth
7.13”
3.0” 7 Tooth 6.55”
8 Tooth
7.49”
Shaft Size#
Pitch 7 Tooth
List
8 Tooth
List
9 Tooth List
10 Tooth List
HEX SHAFTS
25mm & 1”
2.52”
54-2509
$86.95 54-2510
$86.95 54-2511 $92.95
2.86”
54-2530
92.95 54-2531
106.95
3.0”
54-2520
92.95 54-2521
106.95
1-1/16”, 27mm, 1-1/8”
2.52”
54-2508
86.95 54-2513
86.95 54-2514 $92.95 54-2515 $106.95
2.86”
54-2533
92.95 54-2534
106.95
3.0”
54-2523
92.95 54-2524
106.95
1-1/4”
2.52”
54-2507
86.95 54-2516
86.95 54-2517 $92.95 54-2518 $106.95
2.86”
54-2536
92.95 54-2537
106.95
3.0”
54-2526
92.95 54-2527
106.95
POLARIS SPLINED SHAFTS (IQ AND PRO CHASSIS - EXCEPT BELT DRIVE MODELS)
2.52”
54-2539 $106.95
2.86”
54-2541
$106.95
3.0”
54-2544
$106.95 54-2545
106.95
SKI-DOO SPLINED SHAFTS
2.86”
54-2552
**
$106.95
3.0”
54-2551
**
106.95 54-2553
**
$106.95
SLEEVE TOOL
for
SKI-DOO SPLINED SHAFTS
Description
WPS#
List
Sleeve Tool
54-2499 $19.95
• Required to install No Slip Sprockets on Ski-Doo splined shafts
• For all ‘08 and newer XP, XR, XM and XS chassis models
# Due to the press fit required, UHMW sprockets commonly measure as much as 1/8” less than the desired shaft size.
** Sleeve Tool required to install No Slip Sprockets on Ski-Doo splined shafts
Note: Some models will require that the front of the slide rails be shortened for clearance. We recommend that the skid
frame be installed without the springs and cycled to check rail tip to sprocket clearance.
If rails must be shortened, Anti-stab kit must be installed (see page 992)
Model
Shaft Dia.
1 1/2” Track Height
2” Track Height
2 1/4” Track Height
ARCTIC CAT
AWS I & II (aluminum spindle housings)
1-1/16”
8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
AWS III IV & V (steel spindle housings) except ‘00-03 Powder
Special / Mtn Cat
1-1/16”
9 tooth stock sprockets
8 tooth or 9 tooth with
notched track
8 tooth sprockets with track trimmed
‘00-02 Powder Special / Mtn Cat (rolled chaincase stock)
1-1/16”
9 tooth stock sprockets
9 tooth stock sprockets
9 tooth sprockets with track trimmed
POLARIS
‘80-96 models except below
1”
8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘95-96 XLT XCR600 Storm; ‘96 Ultra; ‘97-02 all models except RMK 1”
9 tooth stock sprockets
8 tooth sprockets required 8 tooth sprockets with track trimmed
‘97-01 RMK (rolled chaincase stock)
1”
9 tooth stock sprockets
9 tooth stock sprockets
9 tooth sprockets with track trimmed
SKI-DOO
‘85-94 PRS & DSA models (dual rear shocks)
1-1/4”
8 tooth sprockets required 7 tooth sprockets required Rolled chaincase required
‘95-02 S-2000 & CK3 models
1-1/4”
9 tooth stock sprockets
8 tooth sprockets required 8 tooth sprockets with track trimmed
‘99-03 ZX models
1-1/16”
9 tooth stock sprockets
9 tooth stock sprockets
9 tooth sprockets with track trimmed
YAMAHA
‘92-97 V-Max 4
27mm (1-1/16”) 8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘94 V-Max 500 & 600
27mm (1-1/16”) 7 tooth or 8 tooth with
cooler removed
7 tooth sprockets with
cooler removed
7 tooth cooler removed and track
trimmed
‘95-96 V-Max / Mtn Max 500 & 600 High profile tracks will not fit XT 27mm (1-1/16”) 8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘97-03 V-Max ‘97-99 Mtn Max High profile tracks will not fit XT
27mm (1-1/16”) 9 tooth stock sprockets
8 tooth sprockets required 8 tooth sprockets with track trimmed
‘00-03 Mtn. Max
27mm (1-1/16”) 9 tooth stock sprockets
9 tooth stock sprockets
9 tooth stock sprockets
SPROCKET SIZE CHART
for
OLDER MODELS (2.52” PITCH)
• Addresses bulkhead clearance when installing taller height tracks.
TRACKS / STUDS / SPROCKETS