744 / 1600
x
X X
X
X
744
HELMETS
HELMET
ACCESSORIES
EYEWEAR
APPAREL
PROTECTIVE
SURVIVAL /
BAGS
VIDEOS
SNOWMOBILE
ACCESSORIES
SNOWBIKE
SLEDS /
TRAILERS
ELECTRICAL
EXHAUST
ENGINE
STEERING /
CONTROLS
AIR /FUEL
WINDSHIELDS
BODY
TUNNEL /RAIL
ACCESSORIES
TRACKS /STUDS /
SPROCKETS
REAR
SUSPENSION
SHOCKS
FRONT
SUSPENSION
SKIS /RUNNERS
BRAKES
CHAIN /
SPROCKETS
BELTS
CLUTCHING
CHEMICALS
TOOLS /
FASTENERS
PROMOTIONAL
REFERENCE
INDEX
Auto Tune is another helpful tuning aid. Allows user to program a target O2
map into the module based on throttle position and RPM. When connected
and turned on, fueling will self adjust to achieve the target O2 numbers as you
ride. We have found the best results are achieved when running at a constant
throttle position (the use of a throttle stop is beneficial to keep the throttle po-
sition constant). In some areas manual tuning is still mandatory due to other
systems that are in place. SLP has initial O2 map recommendations for you to
start with. Please inquire for more detailed information specific to your model.
AUTO TUNE
B
y
DYNOJET
Description
SLP# WPS#
List
Auto Tune
70-126
132-90020 $324.95
Extra Bung and Plug 19-101
132-90095
9.95
POD-300 DISPLAY
B
y
DYNOJET
The POD-300 is an accessory display for Dynojet devices that support DJ-
CAN; including the popular Power Commander V, Autotune, WideBand 2, and
CMD. Simply connect the included CAN cable and you’re ready to go; there’s
no need to tap power or deal with other messy connections. Need to adjust
your tune in the field, or datalog the supported channels to further refine
your tune? No problem, with the POD-300 you’re just a few clicks away from
taking advantage of the many features with it’s easy to use menu system.
FEATURES
• Real time fuel adjustments
• Display channels real time: RPM,
TP, Map Position (When using map
switch), duty cycle, fuel changes,
ignition changes and wideband air/
fuel ratio - (W/WB2 or AutoTune
connected)
• Weather resistant for use in all
conditions.
• Log channels saved to internal
memory and can be viewed /
analyzed with DynoJet’s Powercore
Software
• High contrast display, viewable in
direct sunlight.
Description SLP# WPS#
List
POD-300 Display
70-175
110-70175 $249.00
Description
SLP# WPS#
List
Wideband 2 with POD-300 Display 70-176
110-70176 $529.95
Extra Bung and Plug
19-101
132-90095
9.95
This wideband O2 gauge is an extremely accurate and capable unit.
Complete with it’s own POD-300 Digital Display, it makes precision fuel
injection tuning easy. It allows the user to monitor and record O2, throttle
position, RPM, and one other 0 to 5 volt analog input such as manifold
air pressure, boost pressure, etc. It can be used as a stand alone unit or
connected to a Power Commander V (PCV). When connected to a PCV,
the injector duty cycle and percent of change can also be monitored and
recorded. If desired, with the use of a CAN to CAN cable (PN 70-134)
this Wideband 2 can be used as an Autotune unit (refer to the Autotune
description below). It has the ability to test the sensor condition at any
elevation to ensure the data you are receiving is accurate. This unit is
extremely beneficial for precision fuel injection tuning.
WIDEBAND 2 WITH POD-300 DISPLAY
B
y
DYNOJET
AIR / FUEL