533 / 1259
x
X X
X
X
WINDSHIELDS /
FAIRINGS
AUDIO /
COMMUNICATION
SEATS /
LUGGAGE
BARS / MIRRORS /
CONTROLS
EXHAUST
AIR /
FUEL SYSTEMS
ENGINE
TRANSMISSION /
DRIVELINE
GASKETS /
SEALS
ELECTRICAL
LIGHTING
CABLES
BRAKES
OIL FILTERS
SUSPENSION
BODY
WHEELS
TIRES /
TIRE ACC.
BIKE ACC.
VICTORY /
INDIAN
COVERS / LOCKS /
TIEDOWNS
CHEMICALS
TOOLS
HELMETS
HELMET ACC.
EYEWEAR
APPAREL /
RIDER ACC.
PROMOTIONAL
REFERENCE
INDEX
533
Description
WPS#
LIst
Digital battery tester
490-9951
$199.95
• Tests cold cranking amps (CCA)
on all 12 volt lead acid, lead gel
and lithium batteries
• Works with powersport and
automotive batteries
• 2000 CCA test capacity
• Shows, voltage, state of charge
and state of health of the battery
• Adjustable backlight display, can
be used in varying light conditions
• Also capable of testing most
automotive and some powersport
vehicle charging systems*
• Includes storage case
CCA capacity of the battery will need to be known for proper testing, CCA list
is included with the instructions. Contact WPS if your powersport battery is not
listed.
*The primary intention for this tester is to analyze a batteries condition, if it does
not analyze a charging systems condition properly, it does not mean that the
tester is at fault.
DIGITAL BATTERY TESTER
6
and
12 VOLT BATTERY CHARGER
• Converts from 6 to 12 volts at the flick of a switch
• Snap-cord style leads
• Economically priced
12 VOLT/2 AMP BATTERY CHARGER
Charges and maintains all 12 volt lead acid, gel and lithium iron
phosphate (LiFePO4)/lithium ion polymer powersport batteries.
• CONSTANT CURRENT CHARGE - If the battery voltage is over
10 volts, the charger will deliver a 2 amp charge until the battery
reaches 14.2 volts
• MAINTENANCE CHARGE - When the battery reaches 14.2
volts, the charger will automatically convert to maintenance
mode. The charger will revert to charge mode when the voltage
drops below a specified voltage
• LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts,
the charger will apply a .2 amp charge to recover the battery,
once the battery reaches 8 volts, the charger will apply a .5 amp
charge, at 10 volts a full 2 amp charge is applied until the battery
is fully charged
• AUTOMATIC VERIFICATION STAGE - Charger automatically
stops charging if the battery does not reach at least 10 volts
after 2 hours of charging
• SAFETY - Power is not passed thru the charging leads unless
they are connected to a battery
• LED indicator light shows charging status
• Includes heavy duty clamps and fused ring terminal SAE
adapter
WPS# List
490-9950 $69.95
Description
WPS# List
Charger
56-1111 $28.95
Replacement Battery Leads
56-1110 3.75
ELECTRICAL