737 / 1452
EXHAUST
TIRES
TUBES /
TIRE ACC.
BODY / FRAME
ACCESSORIES
LUGGAGE /
SEATS
COVERS /
SECURITY
WINDSHIELDS
HANDLEBARS /
CONTROLS
LEVERS /
CABLES
FUEL SYSTEMS
AIR FILTERS
OIL FILTERS
ELECTRICAL
LIGHTING /
GAUGES
BATTERIES /
CHARGERS
ENGINE /
CLUTCHES
SUSPENSION /
BEARINGS
CHAINS / BELTS
SPROCKETS
BRAKING
COMPONENTS
CHINESE
VEHICLE PARTS
CHEMICALS
GAS CANS
TOOLS /
HARDWARE
TRANSPORT /
TRAILER
PROMOTIONAL
REFERENCE
INDEX
x
X X
X
X
737
Description
WPS#
LIst
Digital battery tester
490-9951
$199.95
• Tests cold cranking amps
(CCA) on all 12 volt lead acid,
lead gel and lithium batteries
• Works with powersport and
automotive batteries
• 2000 CCA test capacity
• Shows, voltage, state of
charge and state of health of
the battery
• Adjustable backlight display,
can be used in varying light
conditions
• Also capable of testing
most automotive and some
powersport vehicle charging
systems*
• Includes storage case
CCA capacity of the battery will need to be known for proper testing,
CCA list is included with the instructions. Contact WPS if your
powersport battery is not listed.
*The primary intention for this tester is to analyze a batteries condition,
if it does not analyze a charging systems condition properly, it does not
mean that the tester is at fault.
DIGITAL BATTERY TESTER
6
and
12 VOLT BATTERY CHARGER
• Converts from 6 to 12 volts at the flick of a switch
• Snap-cord style leads
• Economically priced
12 VOLT/2 AMP BATTERY CHARGER
Charges and maintains all 12 volt lead acid, gel and lithium iron
phosphate (LiFePO4)/lithium ion polymer powersport batteries.
• CONSTANT CURRENT CHARGE - If the battery voltage is over
10 volts, the charger will deliver a 2 amp charge until the battery
reaches 14.2 volts
• MAINTENANCE CHARGE - When the battery reaches 14.2
volts, the charger will automatically convert to maintenance
mode. The charger will revert to charge mode when the voltage
drops below a specified voltage
• LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts,
the charger will apply a .2 amp charge to recover the battery,
once the battery reaches 8 volts, the charger will apply a .5 amp
charge, at 10 volts a full 2 amp charge is applied until the battery
is fully charged
• AUTOMATIC VERIFICATION STAGE - Charger automatically
stops charging if the battery does not reach at least 10 volts
after 2 hours of charging
• SAFETY - Power is not passed thru the charging leads unless
they are connected to a battery
• LED indicator light shows charging status
• Includes heavy duty clamps and fused ring terminal SAE
adapter
WPS# List
490-9950 $69.95
Description
WPS# List
Charger
56-1111 $28.95
Replacement Battery Leads
56-1110 3.75
BATTERIES / CHARGERS