692 / 1452
x
X X
X
X
EXHAUST
TIRES
TUBES /
TIRE ACC.
BODY / FRAME
ACCESSORIES
LUGGAGE /
SEATS
COVERS /
SECURITY
WINDSHIELDS
HANDLEBARS /
CONTROLS
LEVERS /
CABLES
FUEL SYSTEMS
AIR FILTERS
OIL FILTERS
ELECTRICAL
LIGHTING /
GAUGES
BATTERIES /
CHARGERS
ENGINE /
CLUTCHES
SUSPENSION /
BEARINGS
CHAINS / BELTS
SPROCKETS
BRAKING
COMPONENTS
CHINESE
VEHICLE PARTS
CHEMICALS
GAS CANS
TOOLS /
HARDWARE
TRANSPORT /
TRAILER
PROMOTIONAL
REFERENCE
INDEX
692
THE ORIGINAL BACKOFF™
BRAKE LIGHT MODULE
WPS# List
28-01001 $37.95
BACKOFF™ BRAKE HOLD MODULE
• The Brake Hold Module connects to your bike’s electronic speed pick-
up sensor (will not work with cable driven speedometers); to keep your
brake lights on when you release your brakes but are still decelerating
• Mode #1: Emits a visual signal of 3 short light flashes, followed by 1
long light flash (3.5 seconds). The signal automatically repeats itself
as long as the brake lights are on. Mode #2: Emits a visual signal of 5
quick flashes, followed by a steady on light that remains steady as long
as the brake lights are on
• 12 volts DC - Maximum Capacity: 10 Amps (normally up to 3 bulbs)!
• Compact size. - 2-1/4”L x 1-5/8”W x 5/8”H sealed weather resistant
heat sink case.
• 1 Year limited warranty
• Your Bike MUST have Electronic Pick-Up Sensor for this
module to function
WPS# List
28-01020 $64.95
WPS# List
28-01009 $42.95
BACKOFF™ WIG WAG MODULE
• The Wig-Wag enables your brake lights to alternate back and forth in
a wig-wagging pattern.
• This module is specifically designed for use with motorcycle’s that
are equipped with 2 brake lights located side by side.
• Choice of 2 different modes during installation.
• 12 volts DC, Maximum Capacity 10 Amps!
• Compact size. - 2-1/4”L x 1-5/8”W x 5/8”H sealed weather resistant
heat sink case
• Limited Warranty - One Year
• Compact solid state module converts your ordinary brake light into an
attention getting visual alerting device, more visibility and conspicuity
when you are stopped or stopping
• With BackOFF installed, when you apply your brakes, it causes your
brake light to automatically emit a visual alerting signal of 3 short light
flashes, followed by 1 steady on light condition of 3.5 seconds
• Signal automatically repeats itself as long as the brakes are applied
• Compact size. - 2-1/4”L x 1-5/8”W x 5/8”H
• 12v DC, 10A max
BACKOFF™ XP
• This module converts your ordinary brake lights into your choice of two
attention getting visual alerting signals when you apply your brakes:
• Mode #1: Emits a visual signal of 4 short light flashes, followed by 1
long light flash (3.5 seconds). The signal automatically repeats itself
as long as the brakes are applied. Mode #1: Emits a visual signal of 5
short flashes, followed by a steady on light that remains steady on as
long as the brakes are applied
• Compact - 2-1/4”L x 1-5/8”W x 5/8”H sealed weather resistant heat
sink case
• 12 volts DC, 10A max capacity
• Limited Warranty - One Year
• NOTE: This module is rated at 10 Amps which will only drive 3 -
1156/1157 bulbs. Please DO NOT install any BackOFF Brake Light
product on your turn signals, it is illegal and also confusing to following
vehicles.
WPS# List
28-01004 $42.95
LIGHTING / GAUGES