382 / 1452
x
X X
X
X
EXHAUST
TIRES
TUBES /
TIRE ACC.
BODY / FRAME
ACCESSORIES
LUGGAGE /
SEATS
COVERS /
SECURITY
WINDSHIELDS
HANDLEBARS /
CONTROLS
LEVERS /
CABLES
FUEL SYSTEMS
AIR FILTERS
OIL FILTERS
ELECTRICAL
LIGHTING /
GAUGES
BATTERIES /
CHARGERS
ENGINE /
CLUTCHES
SUSPENSION /
BEARINGS
CHAINS / BELTS
SPROCKETS
BRAKING
COMPONENTS
CHINESE
VEHICLE PARTS
CHEMICALS
GAS CANS
TOOLS /
HARDWARE
TRANSPORT /
TRAILER
PROMOTIONAL
REFERENCE
INDEX
382
DUAL SPORT/ADVENTURE
TOURING HANDLEBAR RISERS
2" RISE, 7/8" STEM CLAMP, 7/8" AND/OR
1-1/8" ANTI-VIBRATION RISERS
These versatile Risers allow you to clamp a 7/8" diameter
handlebar or you can remove the 7/8" reducers and then
clamp an 1- 1/8" aluminum "fatbar". If you are thinking
of going to a fatbar after you bend your stock set or just
want the versatility and option to run any bar, this is the
riser to go with. Reducers lock into risers to insure no
slippage between components. Anti-Vibe Risers may
interfere with aftermarket large capacity fuel tanks, and
some steering stem
clamp configurations (use
standard pivoting risers).
These risers use 8mm
bolts. Always check and
confirm that your bike
has adequate cable and
brake line length before
installing any handlebar
risers.
LOW PRO 1 3/4"RISE X 1 1/8" STEM
CLAMP X 1 1/8" PIVOTING RISERS
Low Pro 1¾" center to center rise for BMW F800GS and
KTM's. This riser was developed around the F800GS ABS
model. Riser barely clears the stock F800GS handlebar
clamps and can be pivoted to your desired fore and aft
location. Note; we moved our front brake perch inboard on
the handlebar 3/8" as well to relieve even more brake line
and to insure proper function. When installing these risers
pivoted up and back on the
F800GS, spin the OEM
caps 180 degrees to make
the final tightening bolt the
forward bolt. Low Pro Riser
clears KTM clamps as well,
a recommended riser for the
990 Adventure with stock
lines. Low Pro Riser also
has (1) 8mm tap hole in the
end of the posts to mount
what ever you desire. Always
check and confirm that
your bike has adequate cable and brake line length before
installing any handlebar risers.
2" RISE X 1 1/8" STEM CLAMP X 1 1/8"
HANDLEBAR PIVOTING RISERS
2" center to center rise to help accommodate more
applications with out replacing cables. Very popular for
BMW GS 1200. Also a great Riser for KTM 690 Enduro,
along with many other bikes that come with 1 1/8"
handlebars. Can work with stock cables. Always check and
confirm that your bike has adequate cable and brake line
length before installing any handlebar risers.
2 1/4" RISE X 1 1/8" STEM CLAMP X 1 1/8"
ANTI-VIBRATION HANDLEBAR RISERS
Anti-Vibe Risers may interfere with aftermarket large
capacity fuel tanks, and some steering stem clamp
configurations (use standard pivoting risers). These risers
use 8mm clamping bolts. Always check and confirm that
your bike has adequate cable and brake line length before
installing any handlebar
risers.
Description WPS # List
7/8 to 7/8 or 1 1/8
44-8450 $162.95
WPS # Color List
44-84992
Natural
$94.95
44-84992B
Black
94.95
WPS # List
44-83477 $94.00
WPS # List
44-84990 $162.95
Continued on the next page
HANDLEBARS / CONTROLS