305 / 1409
EXHAUST
TIRES
TUBES /
TIREACC.
SPORTBIKEACC.
CRUISER /
TOURINGACC.
LUGGAGE /
SEATS
COVERS /
SECURITY
WINDSHIELDS
HANDLEBARS /
CONTROLS
LEVERS /
CABLES
FUELSYSTEMS
AIR FILTERS
OIL FILTERS
ELECTRICAL
LIGHTING /
GAUGES
BATTERIES /
CHARGERS
ENGINE
SUSPENSION /
FRAME
DRIVE
CHAIN
SPROCKETS
BRAKES
CHINESE
VEHICLEPARTS
CHEMICALS
GASCANS
TOOLS
TRANSPORT /
TRAILER
PROMOTIONAL
REFERENCE
INDEX
x
X X
X
X
305
DUAL SPORT/ADVENTURE
TOURING HANDLEBAR RISERS
2" RISE, 7/8" STEM CLAMP, 7/8" AND/
OR 1-1/8" ANTI-VIBRATION RISERS
These versatile Risers allow you to clamp a 7/8" diameter
handlebar or you can remove the 7/8" reducers and then
clamp an 1- 1/8" aluminum "fatbar". If you are thinking of
going to a fatbar after you bend your stock set or just want
the versatility and option to run any bar, this is the riser to go
with. Reducers lock into risers to insure no slippage between
components. Anti-Vibe Risers may interfere with aftermarket
large capacity fuel tanks, and some steering stem clamp
configurations
(use
standard pivoting risers).
These risers use 8mm
bolts. Always check and
confirm that your bike
has adequate cable and
brake line length before
installing any handlebar
risers.
LOW PRO 1 3/4"RISE X 1 1/8" STEM
CLAMP X 1 1/8" PIVOTING RISERS
Low Pro 1¾" center to center rise for BMW F800GS and
KTM's. This riser was developed around the F800GS ABS
model. Riser barely clears the stock F800GS handlebar
clamps and can be pivoted to your desired fore and aft
location. Note; we moved our front brake perch inboard
on the handlebar 3/8" as well to relieve even more brake
line and to insure proper function. When installing these
risers pivoted up and back on
the F800GS, spin the OEM
caps 180 degrees to make
the final tightening bolt the
forward bolt. Low Pro Riser
clears KTM clamps as well, a
recommended riser for the 990
Adventure with stock lines. Low
Pro Riser also has (1) 8mm tap
hole in the end of the posts to
mount what ever you desire.
Always check and confirm that
your bike has adequate cable
and brake line length before installing any handlebar risers.
2" RISE X 1 1/8" STEM
CLAMP X 1 1/8" HANDLEBAR
PIVOTING RISERS
2" center to center rise to help accommodate more
applications with out replacing cables. Very popular for BMW
GS 1200. Also a great Riser for KTM 690 Enduro, along
with many other bikes that come with 1 1/8" handlebars.
Can work with stock cables. Always check and confirm that
your bike has adequate cable and brake line length before
installing any handlebar risers.
2 1/4" RISE X 1 1/8" STEM
CLAMP X 1 1/8" ANTI-VIBRATION
HANDLEBAR RISERS
Anti-Vibe Risers may interfere with aftermarket large capacity
fuel tanks, and some steering stem clamp configurations
(use standard pivoting risers). These risers use 8mm
clamping bolts. Always check and confirm that your bike has
adequate cable and brake line length before installing any
handlebar risers.
Description
WPS #
List
7/8 to 7/8 or 1 1/8
44-8450 $162.95
WPS #
Color
List
44-84992
Natural
$94.95
44-84992B
Black
94.95
WPS #
List
44-83477 $94.00
WPS #
List
44-84990 $162.95
Continued on the next page
HANDLEBARS / CONTROLS