904 / 1445
HELMETS
HELMET
ACC.
EYEWEAR
APPAREL
PROTECTIVE
BAGS/ SURVIVAL
VIDEOS
SNOWMOBILE
ACC.
SLEDS/
TRAILERS
ELECTRICAL
EXHAUST
ENGINE
STEERING/
CONTROLS
AIR/ FUEL
WINDSHIELDS
BODY
TUNNEL/ RAIL
ACC.
TRACKS/ STUDS/
SPROCKETS
REAR
SUSPENSION
SHOCKS
FRONT
SUSPENSION
SKIS/ RUNNERS
BRAKES
CHAIN/
SPROCKETS
BELTS
CLUTCHING
CHEMICALS
TOOLS/
FASTENERS
PROMOTIONAL
REFERENCE
INDEX
904
NO SLIP COMBO SPROCKETS
Drives against involute
lugs and open windows
REQUIRES A FULLY CLIPPED TRACK THAT HAS ALL WINDOWS OPEN
SPROCKET DIAMETER (WITHOUT KNOBS)
2.52”
7 Tooth
5.48”
8 Tooth
6.26”
9 Tooth 7.05”
10 Tooth 7.83”
2.86”
7 Tooth
6.24”
8 Tooth
7.13”
3.0”
7 Tooth
6.55”
8 Tooth
7.49”
Shaft Size#
Pitch 7 Tooth
List
8 Tooth
List
9 Tooth
List
10 Tooth List
HEX SHAFTS
25mm & 1”
2.52”
54-2509
$84.95 54-2510
$84.95 54-2511 $89.95 54-2512 $104.95
2.86”
54-2530
89.95 54-2531
104.95
3.0”
54-2520
89.95 54-2521
104.95
1-1/16”, 27mm, 1-1/8”
2.52”
54-2508
84.95 54-2513
84.95 54-2514 $89.95 54-2515 $104.95
2.86”
54-2533
89.95 54-2534
104.95
3.0”
54-2523
89.95 54-2524
104.95
1-1/4”
2.52”
54-2507
84.95 54-2516
84.95 54-2517 $89.95 54-2518 $104.95
2.86”
54-2536
89.95 54-2537
104.95
3.0”
54-2526
89.95 54-2527
104.95
POLARIS SPLINED SHAFTS
(IQ AND PRO CHASSIS
- EXCEPT BELT DRIVE MODELS)
2.52”
54-2539 $104.95
2.86”
54-2541
$104.95
3.0”
54-2544
$104.95 54-2545
104.95
SKI-DOO SPLINED SHAFTS
2.86”
54-2552
**
$104.95
3.0”
54-2551
**
104.95 54-2553
**
$104.95
SLEEVE TOOL
for
SKI-DOO SPLINED SHAFTS
Description
WPS#
List
Sleeve Tool
54-2499 $19.95
• Required to install No Slip Sprockets on Ski-Doo splined shafts
• For all ‘08 and newer XP, XR, XM and XS chassis models
# Due to the press fit required, UHMW sprockets commonly measure as much as 1/8” less than the desired shaft size.
** Sleeve Tool required to install No Slip Sprockets on Ski-Doo splined shafts
Note: Some models will require that the front of the slide rails be shortened for clearance. We recommend that the skid
frame be installed without the springs and cycled to check rail tip to sprocket clearance.
If rails must be shortened, Anti-stab kit must be installed (see page 914 )
Model
Shaft Dia.
1 1/2”Track Height
2”Track Height
2 1/4”Track Height
ARCTIC CAT
AWS I & II (aluminum spindle housings)
1-1/16”
8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
AWS III IV & V (steel spindle housings) except ‘00-03 Powder
Special / Mtn Cat
1-1/16”
9 tooth stock sprockets 8 tooth or 9 tooth with
notched track
8 tooth sprockets with track trimmed
‘00-02 Powder Special / Mtn Cat (rolled chaincase stock)
1-1/16”
9 tooth stock sprockets 9 tooth stock sprockets 9 tooth sprockets with track trimmed
POLARIS
‘80-96 models except below
1”
8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘95-96 XLT XCR600 Storm; ‘96 Ultra; ‘97-02 all models except RMK 1”
9 tooth stock sprockets 8 tooth sprockets required 8 tooth sprockets with track trimmed
‘97-01 RMK (rolled chaincase stock)
1”
9 tooth stock sprockets 9 tooth stock sprockets 9 tooth sprockets with track trimmed
SKI-DOO
‘85-94 PRS & DSA models (dual rear shocks)
1-1/4”
8 tooth sprockets required 7 tooth sprockets required Rolled chaincase required
‘95-02 S-2000 & CK3 models
1-1/4”
9 tooth stock sprockets 8 tooth sprockets required 8 tooth sprockets with track trimmed
‘99-03 ZX models
1-1/16”
9 tooth stock sprockets 9 tooth stock sprockets 9 tooth sprockets with track trimmed
YAMAHA
‘92-97 V-Max 4
27mm (1-1/16”) 8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘94 V-Max 500 & 600
27mm (1-1/16”) 7 tooth or 8 tooth with
cooler removed
7 tooth sprockets with
cooler removed
7 tooth cooler removed and track
trimmed
‘95-96 V-Max / Mtn Max 500 & 600 High profile tracks will not fit XT 27mm (1-1/16”) 8 tooth sprockets required 7 tooth sprockets required 7 tooth sprockets with track trimmed
‘97-03 V-Max ‘97-99 Mtn Max High profile tracks will not fit XT
27mm (1-1/16”) 9 tooth stock sprockets 8 tooth sprockets required 8 tooth sprockets with track trimmed
‘00-03 Mtn. Max
27mm (1-1/16”) 9 tooth stock sprockets 9 tooth stock sprockets 9 tooth stock sprockets
SPROCKET SIZE CHART
for
OLDER MODELS (2.52” PITCH)
• Addresses bulkhead clearance when installing taller height tracks.
TRACKS / STUDS / SPROCKETS