1365 / 1445
HELMETS
HELMET
ACC.
EYEWEAR
APPAREL
PROTECTIVE
BAGS/ SURVIVAL
VIDEOS
SNOWMOBILE
ACC.
SLEDS/
TRAILERS
ELECTRICAL
EXHAUST
ENGINE
STEERING/
CONTROLS
AIR/ FUEL
WINDSHIELDS
BODY
TUNNEL/ RAIL
ACC.
TRACKS/ STUDS/
SPROCKETS
REAR
SUSPENSION
SHOCKS
FRONT
SUSPENSION
SKIS/ RUNNERS
BRAKES
CHAIN/
SPROCKETS
BELTS
CLUTCHING
CHEMICALS
TOOLS/
FASTENERS
PROMOTIONAL
REFERENCE
INDEX
1365
WPS#
List
18-3985
$48.95
TRACK MARKER
Use the track marker and a template to plan the stud layout.
This marker leaves white dots to verify stud placement
before you start drilling holes in the track.
TRACK TENSION TOOL
Make sure track tension is correct. Use Woody’s track
tension tool to stay within manufacturers guidelines.
Description
WPS#
List
For 5/16” I.D. plates
18-3986
$19.95
INDEXING TOOL
for
SQUARE SUPPORT PLATES
Parallel edges are essential. Square
support plates should run parallel with
the edges of the track to increase the
longevity of the stud and support plate.
The indexing tool quickly aligns support
plates with track edges. Fits 3/8”‘ drive
ratchet.
WPS#
List
18-3980
$8.95
STUD INSTALLATION TOOL
A great new tool for installing studs
made for all Woody’s studs. The
aluminum handle rests in the palm
of your hand so you can apply
pressure needed to keep the stud
from rotating as you torque the nut.
Each tool comes with two hex bits.
TRACK DRILL TOOL
A hollow drill bit for 7mm or 5/16” studs. Make a
precise hole with no mistakes for installing studs.
WPS#
List
18-3982
$29.95
WPS#
List
18-3983
$12.95
TRACK CUTTING TOOL
• Reduces stud installation time in half when
used with the stud installation tool
(p/n 57-8196)
• No power tools needed for track
or field installations
• Requires only a couple turns on the handle
to produce a perfect hole in the track
• Replaceable heat treated 3/8 inch
(9.5mm) steel cutter
• Handle tube stores up to 150 track
plugs for easy disposal
• Convenient air hole in handle allows
you to easily blow plugs out of handle
SNOWMOBILE STUD
INSTALLATION TOOL
• Reduces stud installation time in half when
used with track cutting tool (p/n 57-8195)
• No more blisters from pushing studs through
by hand
• Works with studs with a head diameter of up
to 1 inch (32mm), thread size up to 15/32 inch
(12mm), and length up to 2 3/16 inch (56mm)
• Can reach 8 inches (210mm) from the edge of
the track- a little more than half way across a
standard track
WPS#
List
A Track cutter
57-8195
$87.95
B Replacement cutter
57-8197
3.50
C Replacement cutter stop
57-8198
2.95
WPS#
List
57-8196 $75.95
A
B
C
It is highly recommended that when traction studs are
installed, templates be used for proper placement on the
track. Please refer to PAGES
888-8
for stud templates.
We have all the necessary templates needed for the
different machines and track styles
STUDDING TEMPLATES
TOOLS / FASTENERS