1227 / 1445
HELMETS
HELMET
ACC.
EYEWEAR
APPAREL
PROTECTIVE
BAGS/ SURVIVAL
VIDEOS
SNOWMOBILE
ACC.
SLEDS/
TRAILERS
ELECTRICAL
EXHAUST
ENGINE
STEERING/
CONTROLS
AIR/ FUEL
WINDSHIELDS
BODY
TUNNEL/ RAIL
ACC.
TRACKS/ STUDS/
SPROCKETS
REAR
SUSPENSION
SHOCKS
FRONT
SUSPENSION
SKIS/ RUNNERS
BRAKES
CHAIN/
SPROCKETS
BELTS
CLUTCHING
CHEMICALS
TOOLS/
FASTENERS
PROMOTIONAL
REFERENCE
INDEX
1227
102C
HIGH-PERFORMANCE DRIVE CLUTCH
ULTRA HEAVY-DUTY CLUTCHES
for
1-3/16” to 1-5/16” BELT WIDTHS
Description
WPS#
List
UNIVERSAL CLUTCH
30MM flush tapered bore. comes without cam arms and spring for custom calibration. Can be used on almost any machine that has a 30MM
tapered crank. Use this clutch on machines that are not listed in the applications of the other clutch numbers found on this page.
212600
$376.95
Fits Yamaha SRX ‘76-79. 1-1/4” belt width adjusts to 1-5/16”, clutch bolt is 6-1/2”
KAWASAKI / JOHN DEERE
30MM shallow tapered bore. Comes without cam arms and spring for custom calibration. Fits Kawasaki (Invader, LTD, Intruder, etc.) and John
Deere Liquifire ‘80-81 with Kawasaki engines. 1-1/4” belt width. Clutch bolt 6-1/2”.
208306
$376.95
YAMAHA
30MM shallow tapered bore. Comes without cam arms and spring for custom calibration. Fits ‘80 SRX, ‘80-95 Bravo, ‘89-95 Enticer 400 Long Track,
‘88-91 VK540, ‘80-91 SRV, ‘80-85 SS440, ‘84-89 Phazer, ‘90-91 Phazer II, ‘91 Venture.
208300
$376.95
This clutch has the lip on the fixed face for models where the crankshaft oil seal rides on clutch lip. 108EXP clutches are available for all the aboce
models except Bravo. 1-1/4” belt width. Cam arm pivot bolt kit and 7” mounting bolt supplied
30MM tapered bore. Comes without cam arms and spring for custom calibration. Fits 74-81 GP, Enticer; 79-88 Exciter, Excel; 89-92 Ovation.
Requriring gear for their oil injection system. Clutch bolt 7.
208301
$376.95
Will not fit single cylinder models with shallow tapered bore or older models with splined crankshaft
The ‘‘Duster’’ is the best clutch yet for any snowmobile application.
When you compare the Comet Duster to any other clutch with the overall features of cost, weight, simplicity, ease of
maintenance, endurance and performance, no other clutch can compare. Universal clutch 211493 comes standard with
the ribbed cover. On 440cc or larger machines that will be used to pull cargo sleds or ridden in deep powder snow, order
ribbed cover plate and matching pucks separately.
• Ribbed cover and matching pucks fit any
94C Duster clutch
• Ribbed cover and pucks are standard on
universal Duster clutch sold below
• Allows more horsepower and load without
movable face rotation
• Increased clutch capability allows
economical replacement on more models
the
94C
DUSTER
Simplicity at its finest
Description
WPS#
List
Ribbed Cover Universal 30MM 1:10 flush tapered bore. Adjusts to belts 1-3/16 through 1-1/2 wide. Comes with spacer installed for 1-1/4 belt.
Contains six 211477 pucks and 205583 orange spring.
211493
$261.95
Since the majority of older snowmobiles, including those with Spirit, Kohler, CCW, JLO, Hirth, Tohatsu, Kawasaki, Sachs, Fuji, etc., usually have
30MM 1:10 tapered crankshafts, this is the most popular Duster clutch. For models that have other crankshaft designs or specific requirements
such as ring
3/4” x 16 threaded Rotax bore. For 1 3/16” wide belsts. Contains six 205918 pucks and 205858 pink spring. Older and smaller Ski-Doo
snowmobiles require this bore size
206097
$261.95
1” Straight bore with 1/4” keyway. For 1 3/16” wide belts, contains six 206514 pucks and 205858 pink spring. Often used on early models of
Ski-Daddler, Sno Pony, etc. This bore size and calibration is for 4-cycle engines such as Tecumseh, Kohler, Briggs & Stratton, Honda, Kawasaki,
Wisconsin Robin.
206095
261.95
See pages 1238-1239
for cam arms and springs
• Spring and cam arm options allow precise calibration
• Excellent upshift and back shift characteristics
• Efficiency gets the horsepower to your track
• 7.5" diameter
CLUTCH I NG