Table of Contents Table of Contents
Previous Page  1074 / 1445 Next Page
Information
Show Menu
Previous Page 1074 / 1445 Next Page
Page Background

HELMETS

HELMET

ACC.

EYEWEAR

APPAREL

PROTECTIVE

BAGS/ SURVIVAL

VIDEOS

SNOWMOBILE

ACC.

SLEDS/

TRAILERS

ELECTRICAL

EXHAUST

ENGINE

STEERING/

CONTROLS

AIR/ FUEL

WINDSHIELDS

BODY

TUNNEL/ RAIL

ACC.

TRACKS/ STUDS/

SPROCKETS

REAR

SUSPENSION

SHOCKS

FRONT

SUSPENSION

SKIS/ RUNNERS

BRAKES

CHAIN/

SPROCKETS

BELTS

CLUTCHING

CHEMICALS

TOOLS/

FASTENERS

PROMOTIONAL

REFERENCE

INDEX

1074

UPPER A ARM BRACE

This is a new brace kit to strengthen the weak Upper A Arm

mounting points on the new XP chassis. As many of you know

the A Arm mounting points can bend from impact before the A

Arms bend causing expensive repair. The A Arm should bend

before the chassis so you can change an A Arm instead of hav-

ing to do a complete rebuild of the front end because of a bent

mounting point.

A common problem is when you hit something with the ski

turned it pushes the bottom of the spindle back. The Lower A

Arm is stronger than the Upper A Arm and because of this it will

force the upper A Arm forward and bend it’s rear mount. Some

won’t notice it right away but if you look at your shock and if it’s

not in the center of the Upper A Arm or rubbing on the A Arm

you most likely have a bent Upper A Arm rear mounting point.

You can still ride like this if it’s not too bad but it will drastically

change the caster angle of your spindle and won’t handle well.

DOES NOT fit the XR chassis with the 1200 4 stroke engine,

the 550 fan or the 600 Ace. Will fit the chassis with the 600etec

engine.

The complete kit weighs 12.7 ounces or .79 lbs.

LOWER A ARM BRACE

• This is a bolt on brace kit that strengthens the Lower A Arm

mounting point to the chassis.

• This “S module” is a known weak point on the XP and will break

from an impact before the A Arm will bend. This kit will eliminate

this problem and will save a costly repair.

• Kit will work with a skid plate.

• This kit weights 11.6 ounces or .72 lbs)

SUSPENSION MODULE BRACE

• This is a bolt on brace kit that strengthens the Suspension

Module for the Lower A Arms .

• This “S module” is a known weak point on the XP and can

break from an impact before the A Arm will bend. This kit will

eliminate this problem and will save a costly repair.

• Comes with two longer A Arm bolts.

• This kit weighs 16 ounces or 1 lb

Description

Year

WPS# List

Ski Doo XP/XM/XS (except

for 550F and 600 ACE)

‘08-15

44-9910 $74.95

Description

Year

WPS#

List

Ski Doo XP/XR/XM/XS/XRS ‘08-15

44-9900 $34.95

Description

Year

WPS#

List

Ski Doo XP/XR/XM/XS/XRS ‘08-15

44-9920 $44.95

NOTE: This brace kit needs to be used with our Lower A-Arm brace

part #44-9900. You can use the Lower A-Arm brace by itself but you can not

use the S Module brace by itself.

FRONT SUSPENS I ON