x X X X X 956 WINDSHIELDS / FAIRINGS AUDIO / VIDEO / NAVIGATION LUGGAGE / SEATS EXHAUST FUEL SYSTEMS AIR FILTERS OIL FILTERS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL SPARK PLUGS BATTERIES / CHARGERS LIGHTING / GAUGES FOOTPEGS / FOOT CONTROLS HANDLEBARS / CONTROLS CABLES BRAKES BODY / FRAME SUSPENSION WHEELS TIRES / TIRE ACCESSORIES VICTORY / INDIAN ACCESSORIES COVERS / SECURITY LUBRICANTS / CHEMICALS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT HELMETS EYEWEAR APPAREL / RIDER ACCESSORIES PROMOTIONAL REFERENCE INDEX • Fits all spin-on type oil filters • Use with 3/8" drive ratchet handle • Easily loosens tight filters • Fits into hard to reach locations • Can be used to loosen or tighten cylindrical shaped parts Application WPS# List Cloth Strap 57-8000 $17.99 OIL FILTER STRAP WRENCH SNAP RING PLIERS • Economical pliers that easily work on both inside and outside opening snap rings or clips • Includes 3 extra sets of tips, 1 additional straight tip and 2 offset or angled tips WPS# List 57-8186 $24.99 CLUTCH HOLDING TOOL Designed to hold clutch baskets, flywheels, gears, sprockets, etc. Jaws open to 5 inches wide. Made of medium carbon steel with hardened jaws. A very useful tool for holding any kind of mechanical work. WPS# List 57-8008 $34.99 ROCKER BOX COVER WRENCH • Designed to reach hard to get 3/16 in. allen on the rocker boxes of Big Twin, Sportster & Buell motorcycles • Features a 3/8” drive for use with torque wrench • Vinyl cover offers comfort and minimizes chances of damage to finished surfaces WPS# List 57-8220 $16.99 PUSHROD TOOL SIDE CASE COVER PULLER for H-D® • Used to remove the right side-case cover • Will fit late model HarleyDavidson motorcycles, including all 1970 and later Big Twin models and 1990 and later Sportster models • Includes bracket, puller bolt and set screws • Made in the USA WPS# List 57-8153 $20.99 WPS# List 57-8744 $44.99 • Designed to remove and install the clip on Harley-Davidson® collapsible push rod tubes on Twin Cam and earlier Models • Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer • No more cut knuckles & scratched engine parts from using a screwdriver between the fins • New improved design with shoulder bolt pivot for smoothness and durability FEULING PUSHROD TUBE HOLDER • Makes for easy adjustment of adjustable pushrods by holding pushrod tubes up and out of the way. • Fits EVO, T/C and most aftermarket tubes • Made in the U.S.A. Description WPS# List Pushrod Tube Holder ea. 811-09012 $16.95 Description WPS# List Camplate Rollpin Remover/Installer Tool 811-09000 $49.95 FEULING ROLLPIN TOOL • This tool makes for easy removal and installation of the pressure relief spring, by-pass valve and roll pin in the Twin Cam camplate. • The tool is used to hold the relief spring down and away from the roll pin. • Fits all Twin Cam® engine camplates. • Made in the U.S.A. TOOLS / HARDWARE
RkJQdWJsaXNoZXIy OTUwNDk=