x X X X X 232 WINDSHIELDS / FAIRINGS AUDIO / VIDEO / NAVIGATION LUGGAGE / SEATS EXHAUST FUEL SYSTEMS AIR FILTERS OIL FILTERS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL SPARK PLUGS BATTERIES / CHARGERS LIGHTING / GAUGES FOOTPEGS / FOOT CONTROLS HANDLEBARS / CONTROLS CABLES BRAKES BODY / FRAME SUSPENSION WHEELS TIRES / TIRE ACCESSORIES VICTORY / INDIAN ACCESSORIES COVERS / SECURITY LUBRICANTS / CHEMICALS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT HELMETS EYEWEAR APPAREL / RIDER ACCESSORIES PROMOTIONAL REFERENCE INDEX ROCKER OIL LINES Description Application Year WPS# List Stainless Split Oil Line Shovel Heads `66-84 880-2109 $99.95 Brass Split Oil Line Shovel Heads `66-84 880-2110 $103.95 Rocker Box Oil Line Iron Head Sportsters 880-2111 $72.95 880-2111 880-2110 880-2109 • Heavy 1/4” Brass and Stainless oil lines pre- bent with all necessary fittings. • Easy install, all lines and fittings are polished. Install loop up or down. • These lines will eliminate the problem of the “starving front head” • All compression fittings are pre tightened, thread sealant is provided for the npt to case and rockers. A stainless allen plug is provided for the rear rocker when installed is flush and unseen. • Made in the USA. M8 ROLLER R0CKER Description Application Year WPS# List Roller Rocker Arms M8 Motors `17-24 276-02210 $624.99 • Forged from 8620 steel for greater strength • Rollers eliminate thrusting on valves for decreased wear on the valve train • Rocker geometry (1.640 ratio) is better suited to high lift cams • Bushings are 50% longer than stock, increasing time between rebuilds • Larger surface area on the thrust surfaces reduces wear on the heads ROCKER ARM BUSHINGS • Bronze rocker bushing material meets the high standards set for success • Rocker arm bushings are held to tight dimensional tolerances, have an excellent surface finish, machine well, and have a tapered lead on each end to ease installation • Made from US mill certified SAE 660 bearing bronze bar stock Description Application WPS# List 0.6795” O.D. (8 Pack) Evo Big Twin `84-99, Evo, XL `86-20, and Shovelhead `66-83 191-57088 $33.95 Description Application WPS # List Rocker Arm Tower Stud Kit M8 191-58016 $107.95 M8 STEEL ROCKER ARM TOWER STUD KIT 191-58016 • S tuds are made from 180,000 psi yield strength, fine grain, heat treated, aircraft grade alloy steel. • Oil is sprayed directly on the valve springs, reducing potential for breaking a valve due to over-heating (stock rockers tend to oil the rocker boxes, not the valves) • Capable of .650” max Valve Lift • A must have for cams with .550” or greater lift! • KPMI “rolls” the threads, heat treats and then center less grinds the entire body of the stud. • Entire stud and nuts are coated in a premium corrosion resistant treatment of Black Oxide. • The nuts are manufactured from a high tensile premium steel that promotes excellent surface finish and tight tolerances then heat treated. • Kit comes with 8 studs and 8 nuts. ENGINE
RkJQdWJsaXNoZXIy OTUwNDk=