x X X X X 1019 WINDSHIELDS / FAIRINGS AUDIO / VIDEO / NAVIGATION LUGGAGE / SEATS EXHAUST FUEL SYSTEMS AIR FILTERS OIL FILTERS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL SPARK PLUGS BATTERIES / CHARGERS LIGHTING / GAUGES FOOTPEGS / FOOT CONTROLS HANDLEBARS / CONTROLS CABLES BRAKES BODY / FRAME SUSPENSION WHEELS TIRES / TIRE ACCESSORIES VICTORY / INDIAN ACCESSORIES COVERS / SECURITY LUBRICANTS / CHEMICALS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT HELMETS EYEWEAR APPAREL / RIDER ACCESSORIES PROMOTIONAL REFERENCE INDEX WPS# List 57-8548 $14.99 PRO CLUTCH ADJUSTER TOOL for H-D® • For use on all 1998 and later models excluding applications with hydraulic clutches • Deep socket allows tool to recess into clutch basket and can be driven with 11/16” combination wrench or adjustable wrench • Compact design fits easily in the saddle bag or tool wrap • Through hole allows access with hex wrench to hold clutch adjuster screw while simultaneously tightening the adjuster lock-nut • Fits all spin-on type oil filters • Use with 3/8" drive ratchet handle • Easily loosens tight filters • Fits into hard to reach locations • Can be used to loosen or tighten cylindrical shaped parts Application WPS# List Cloth Strap 57-8000 $17.99 OIL FILTER STRAP WRENCH SNAP RING PLIERS • Economical pliers that easily work on both inside and outside opening snap rings or clips • Includes 3 extra sets of tips, 1 additional straight tip and 2 offset or angled tips WPS# List 57-8186 $24.99 CLUTCH HOLDING TOOL Designed to hold clutch baskets, flywheels, gears, sprockets, etc. Jaws open to 5 inches wide. Made of medium carbon steel with hardened jaws. A very useful tool for holding any kind of mechanical work. WPS# List 57-8008 $34.99 ROCKER BOX COVER WRENCH • Designed to reach hard to get 3/16 in. allen on the rocker boxes of Big Twin, Sportster & Buell motorcycles • Features a 3/8” drive for use with torque wrench • Vinyl cover offers comfort and minimizes chances of damage to finished surfaces WPS# List 57-8220 $16.99 PUSHROD TOOL SIDE CASE COVER PULLER for H-D® • Used to remove the right side-case cover • Will fit late model HarleyDavidson motorcycles, including all 1970 and later Big Twin models and 1990 and later Sportster models • Includes bracket, puller bolt and set screws • Made in the USA WPS# List 57-8153 $20.99 TAPPET TOOL FOR H-D® • For use on big twin (excluding twin cam) with slotted screw tappet oil filter screen cover • Designed for use with 7/16” combination wrench to allow for maximum rotation without touching engine cases • O-ring design retains the tool in wrench or socket • Flange design allows downward force to be applied to tool • Can be used without removing exhaust pipes on most bikes • Tappets should be serviced every oil change WPS# List 57-8339 $9.50 WPS# List 57-8744 $44.99 • Designed to remove and install the clip on Harley-Davidson® collapsible push rod tubes on Twin Cam and earlier Models • Flat portion of tool fits under the cylinder head while cupped end fits over the bell in the tube and then compresses the spring allowing for easy access to the spring cap retainer • No more cut knuckles & scratched engine parts from using a screwdriver between the fins • New improved design with shoulder bolt pivot for smoothness and durability TOOLS / HARDWARE
RkJQdWJsaXNoZXIy OTUwNDk=