x X X X X 613 BATTERY MANAGEMENT SYSTEMS MULTIPLE BANK PLUS The multiple bank Battery Tender Charging Stations have two or four encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. This charger will operate anywhere in the world! • 2 or 4 independent charging stations • 12 volts @ 1.25 amps per station • Operates anywhere in the world, 100240 VAC 50/60 Hz • Microprocessor controlled constant current charging • Reverse polarity protected, spark proof • Perfect for all AGM (absorbed glass mat), sealed maintenance free and flooded batteries • Complies with US and international safety standards (UL/CE) • 2 year warranty Description WPS# List 2 Station 56-1116 $144.95 4 Station 56-1134 $243.95 REPLACEMENT LEADS Leads with ring connector 56-1138 $11.95 Lead with clamps 56-1137 $13.95 12.5’ Extension Lead 56-1142 $19.95 25’ extension lead 56-1139 $33.95 Safe, Reliable, Trouble Free Battery Care! Developed To Maintain Batteries In Vehicles Not In Constant Use And Stored Over Lengthy Periods Of Time. Fully Automatic Charger! ALUMINUM CONSTRUCTION Equipped with 6’ power cord, 6” output cord with clamps, and 6” quick disconnect output cord. PLUS • Automatically switches after fully charging to storage charge; constantly monitors the battery without the damaging effects of trickle charging • After a full charge is reached, the Battery Tender automatically converts to a float charger and monitors the battery at 13.6 volts • Improved circuit design provides better absorption for sealed batteries • Five year warranty Description WPS# List 12 Volt, 1.25 amp “Plus” 56-1130 $76.95 These chargers do NOT meet California/Oregon appliance efficiency standards. These chargers do NOT meet California/Oregon appliance efficiency standards. Description WPS# List 5 Bank charger 56-1090 $749.95 10 Bank charger 56-1091 $999.95 Replacement clamps/ea 56-1137 $13.95 • Charges/maintains up to 5 or 10 batteries simultaneously, 6 or 12 volts @ 4 amps • AGM/Standard or GEL/Lithium 12V switchable • To avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to battery • Maintains batteries at full charge • 4 amps per output charging current • Clamps included • Safety timer: 25 hrs. • AC power cord length: 6 ft. - 16 AWG • DC output cord length: 10 in. - 16 AWG • 3 Year limited warranty Alligator clip combo cable provides quick and easy clip connection to batteries or clips can be removed for ring terminal application STREET V-TWIN OFFROAD ATV / UTV TUBES / ACCESSORIES TRAILER LUBRICANTS / CHEMICALS GAS CANS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX TOOLS / HARDWARE
RkJQdWJsaXNoZXIy OTUwNDk=