x X X X X 566 STEERING STEM NUT COMBO WRENCH • Thin design allow you to tighten/remove steering stem nut without removing handle bars • Available in 27, 30, 32mm • Durable steel construction Description WPS# List 27mm 634-63234 $13.95 30mm 634-63236 $13.95 32mm 634-63237 $13.95 FORK CAP WRENCH KTM FORK CAP REMOVER • 22mm hex and 3/8" square drive • This tool allows removal and replacement of the accessory fork cap KTM part # 48600074S • The tool is slotted to allow removal and replacement of caps with the Micro or Pro Bleeder FORK COMPRESSION VALVE REMOVAL TOOL • For removing the compression valve from cartridge • 19mm Drive HEX/36mm octagon • Billet 6061 T-6 Aluminum WPS# List 57-8290 $31.99 WPS# List 57-8373 $14.99 Description WPS# List 49mm/12mm 57-8429 $22.99 50mm/12mm 57-8428 $19.99 50mm/14mm 57-8706 $29.99 • 49 mm, 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamaha's & Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench) • 50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM's • 12 mm slot for holding the damper rod for removing the rebound bolt., this allows for the removal of the cartridge from the lower fork leg • Made of billet 6061-T6 and anodized Motion Pro blue • Laser engraved markings with Motion Pro logo • Original Motion Pro design STREET V-TWIN OFFROAD ATV / UTV TUBES / ACCESSORIES TRAILER LUBRICANTS / CHEMICALS GAS CANS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX TOOLS / HARDWARE
RkJQdWJsaXNoZXIy OTUwNDk=