AUDIO / VIDEO / NAVIGATION EXHAUST BODY / FRAME LUGGAGE / SEATS COVERS / SECURITY WINDSHIELDS HANDLEBARS / CONTROLS LEVERS CABLES FOOTPEGS / FOOT CONTROLS INTAKE / FUEL SYSTEMS AIR FILTERS OIL FILTERS LIGHTING / GAUGES BATTERIES / CHARGERS ELECTRICAL SPARK PLUGS ENGINE CLUTCH / DRIVE SUSPENSION / BEARINGS CHAIN SPROCKETS BRAKES CHINESE VEHICLE PARTS STANDS TRANSPORT / RAMPS PROMOTIONAL INDEX x X X X X 562 Description WPS# List Turn Signal Module 28-01501 $79.95 SDC TURN SIGNAL CONVERSION MODULE • Allows your rear turn signal lights to function as turn signals plus additional brake and / or running lights • When brakes are applied your turn signals will illuminate as additional brake lights • If a turn signal is applied, it will have priority over the brake light function on the side that is selected until the turn signal is canceled • Additionally, the rear light can function as running / marker lights when there is no turn signal or brake light (illuminates at 50% brightness) Note: If you convert turn signals into brake lights, you will need to change the bulb / lens to red: or replace the turn signal light with a red light Description WPS# List Dual-Load Equalizer 28-01008 $21.95 DUAL-LOAD EQUALIZER • The Dual Load Equalizer is designed to correct the issue of turn signals flashing too quickly or not at all. It does this by adding back the load to your mechanical flasher relay that was removed by converting stock incandescent turn signals to LED’s • Dependable weather proof Solid-state electronic components • Dimensions: 2 1/4” L x 1 5/8” W x 5/8” H • One equalizer per set of lights Description WPS# List Voltage Monitor 28-01050 $32.95 SDC HEADS UP VOLTAGE MONITOR • This module is a micro-processor that monitors the output of the charging system and is accurate to within 200 milli-volts • The Heads-Up Voltage Monitor’s™ onboard microprocessor performs a self-test each time voltage is applied • Additionally, you will be notified of serious fault conditions by an attention-getting flash of the LED • The single, multi-color LED (red-amber-green) visually indicates the state of your motorcycle’s battery / charging system • At a glance, you will instantly know whether the voltage is normal or abnormal, Auto-dimming - after 8 seconds at a single voltage, the LED intensity is lowered to 50% • Voltage Range: 6 to 17 VDC, accuracy: within 200 milli-volts, Amp Draw: 20–85 milli-amps • Dimension: 2 1/4” L x 1 5/8” W x 5/8” H LIGHTING / GAUGES
RkJQdWJsaXNoZXIy OTUwNDk=