AUDIO / VIDEO / NAVIGATION EXHAUST BODY / FRAME LUGGAGE / SEATS COVERS / SECURITY WINDSHIELDS HANDLEBARS / CONTROLS LEVERS CABLES FOOTPEGS / FOOT CONTROLS INTAKE / FUEL SYSTEMS AIR FILTERS OIL FILTERS LIGHTING / GAUGES BATTERIES / CHARGERS ELECTRICAL SPARK PLUGS ENGINE CLUTCH / DRIVE SUSPENSION / BEARINGS CHAIN SPROCKETS BRAKES CHINESE VEHICLE PARTS STANDS TRANSPORT / RAMPS PROMOTIONAL INDEX x X X X X 289 2" RISE, 7/8" STEM CLAMP, 7/8" AND / OR 1-1/8" ANTI-VIBRATION RISERS 2-1/4" RISE X 1-1/8" STEM CLAMP X 1-1/8" ANTI-VIBRATION HANDLEBAR RISERS Description Finish WPS # List 7/8” to 7/8” or 1 1/8” Natural 44-8450 $180.95 7/8” to 7/8” or 1 1/8” Black 44-8450B $196.95 Description WPS # List 2 1/4” x 1 1/8” 44-84990 $180.95 The combination of off-road and on-road riding skills demand that your handlebars are at the proper level and position. Rox Risers are the premier handlebar riser for Adventure Motorcycling, on road and off. Its pivot puts your bars at your preferred position relieving wrist, elbow and shoulder stress. As you relieve these stresses, and increase control of your motorcycle so you can spend more time on your bike and enjoy the ride more. Rox Risers are... • Adjustable • Dual rotation points makes Rox Riser selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position. Rox Risers allow you to raise your stock bars or use a motocross style bar • Universal • With its two piece design, Rox Riser will install on virtually any Street/ Mini/Off Road Bike that has clamps to hold the handlebars, making it incredibly universal • Engineered and tested for maximum strength and durability, CNC machined from billet 6061 T6 aluminum • Rox 1 1/8" clamping riser doubles as your conversion kit for using larger style bars on your Street/Mini/Off Road Bike with the bonus of getting the ability to adjust your bars forward and back as well as raise them up to the proper height • Patent # US 6,920,806 ANTI-VIBRATION HANDLEBAR RISERS FOR BMW • Fits 2013 and up BMW R1200GS/GSA models • 2” of rise, 1¼” stem • Accepts 1¼” handlebar • Reduces bar vibration, hand tingling and numbness • Improves control when off-road riding • Risers can be positioned forward/backward depending on rider preference • These bar risers are designed to use the stock BMW caps/bolts on the top of the risers, they come with replacement caps that will be used to tighten the stem of the riser to the OEM triple clamp • Works with stock cables, cable rerouting instructions included in package • Made in the USA Description WPS# List BMW Risers 44-8451 $196.95 DUAL SPORT / ADVENTURE TOURING HANDLEBAR RISERS • These versatile Risers allow you to clamp a 7/8” diameter handlebar or you can remove the 7/8” reducers and then clamp an 1- 1/8” aluminum “fatbar” • If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with • Reducers lock into risers to insure no slippage between components • Risers use 8mm bolts • Note: Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers) • Note: Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers • Risers use 8mm clamping bolts • Note: Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers) • Note: Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers HANDLEBARS / CONTROLS
RkJQdWJsaXNoZXIy OTUwNDk=