TRACK KITS WINCH PLOW TOWING / FARM ATV BODY UTV BODY AUDIO / VIDEO / NAVIGATION UTV CAB ACCESSORIES ACCESSORY MOUNTS MIRRORS WINDSHIELDS ROOFS CARGO MANAGEMENT LIGHTING / GAUGES HANDLEBARS / CONTROLS LEVERS / CABLES INTAKE / FUEL SYSTEMS AIR FILTERS OIL FILTERS BATTERIES / CHARGERS ELECTRICAL SPARK PLUGS ENGINE EXHAUST AXLES DRIVE BELTS / CHAINS / SPROCKETS BRAKES SUSPENSION / BEARINGS CHINESE VEHICLE PARTS GAS CANS COVERS / SECURITY TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX x X X X X 66 • Does the machine have tracks, larger tires, higher A-arms, lift kit, or anything that raises the height of the machine from original stock height? • Is the machine lower than stock height or has settled over time? • Unlevel plowing causes strain on the plow system and leads to uneven wearing of the wear bars when the blade is rotated. • By installing the correct KFI leveling kit for your application, the proper blade angle and plowing geometry will be restored. • Specifically designed for use with KFI UTV Tubes #10-6300 • DOES NOT work with KFI UTV Tubes #10-5635 • Designed to bolt onto your existing tube system. • Constructed of Grade 50 Steel • All Hardware included With the plow mount installed on the machine, measure from the ground to the center of the pin on the plow mount. KFI’s ideal plow pin height is between 9.5” to 11.5”. If the measurement falls below 9.5” or above 11.5”, use the chart below to decide which leveling kit is needed: • Guarantees ideal push tube geometry • Correct blade attack angle • Even wearing on wear bar when blade is rotated • Less strain on plow system If the push tubes are not level to the ground it will cause: GROUND GROUND NOT LEVEL TO GROUND LEVEL TO GROUND SELECTING A LEVELING KIT PRO 2.0 PLOW LEVELING KITS • Incorrect blade attack angle • Uneven wearing on wear bars when blade is rotated • Added strain to plow system WITHOUT A LEVELING KIT WITH A LEVELING KIT MEASURING PIN HEIGHT 1 INCH #10-6320 1 OR 2 INCH #10-6322 4 INCH #10-6324 6 INCH #10-6326 PLOW
RkJQdWJsaXNoZXIy OTUwNDk=