2023 HardDrive

WINDSHIELDS / FAIRINGS AUDIO / VIDEO / NAVIGATION LUGGAGE / SEATS EXHAUST FUEL SYSTEMS AIR FILTERS OIL FILTERS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL SPARK PLUGS BATTERIES / CHARGERS LIGHTING / GAUGES FOOTPEGS / FOOT CONTROLS HANDLEBARS / CONTROLS CABLES BRAKES BODY / FRAME SUSPENSION WHEELS TIRES / TIRE ACCESSORIES VICTORY / INDIAN COVERS / SECURITY LUBRICANTS / CHEMICALS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT HELMETS HELMET ACCESSORIES EYEWEAR APPAREL / RIDER ACCESSORIES PROMOTIONAL REFERENCE INDEX x X X X X 228 • The tuning functionality is solely accessible through the DIAG4BIKE Serial Diagnostic Software and Interface. • The tuning software, DIAG4TUNE, is included in the diagnostic software as an additional feature. To tune Harley and Indian motorcycles, a special hardware key MULTI-DONGLE must be purchased to use in conjunction with an additionally purchased tuning license. • Software version 21.1 or higher and a full-time connection to the internet is required to use the MULTI DONGLE functions. • The MULTI-DONGLE serves as a carrier of the electronic tuning licenses which are purchased online via the shopping cart inside the DIAG4TUNE program. • The tuning process does not require the installation of additional component(s) or any motorcycle harness modification. Tuning is based on the modification of EFI Calibrations (software modifications/reflash), exclusively via the diagnostic connector. • Original calibrations read from the motorcycle are captured and stored on the Diag4Bike server which is secured at a professional level against data loss. • The tuning process is used to optimize Fuel Maps in case of any changes to the configuration of engine components or accessories (exhaust, intake or cams, etc.). Pre-set tuning calibrations are available as well as customizable tuning and timing functions. Description WPS# List Tuning Device Multi-Dongle 867-02054 $74.00 AFR Tuning Monitor 867-02070 $536.00 Lambda Installation Kit 867-02071 $1613.00 Lambda Install Kit Mini 867-02072 $536.00 ENGINE TUNING BLANK ECM FLASH FOR HARLEY AFR TUNING MONITOR LAMBDA INSTALLATION KIT INSTALLATION SET LAMBDA MINI • This function is used to flash a new blank ECM from the manufacturer. By this function you can set a VIN number and after, flash the selected calibration according to that VIN number. It can also be facilitated with a used ECM. If this function is successful, you can continue into the DIAG4TUNE and its full range of functions. A tuning license is required for this function. • The AFR Tuning Monitor is used for the advanced tuning mode and consists of two wideband Air/Fuel ratio sensors and a compact electronic unit. It is an option for the DIAG4BIKE communication interface and can be used with a roller station or on road tests to develop custom VE (volume efficiency) fuel maps. • This set is an option to the AFR Tuning Monitor. It allows you to install a pair of wide band sensors on all exhausts where it is not possible to simply replace the installed O2 sensors (18mm thread). The set contains a powerful double pump, which ensures high accuracy and measurement speed of the actual AFR in each cylinder. The pump is powered by a 12V supply and can therefore also be used for road testing. An open pipe adapter is available to extract undiluted exhaust gas farther up the pipe. • This set is an option to AFR Tuning Monitor. It allows you to install a pair of wide band lambda sensors on all exhausts where it is not possible to simply replace the installed lambda sensors (18mm thread). 867-02054 FUEL SYSTEMS

RkJQdWJsaXNoZXIy OTUwNDk=