AUDIO / VIDEO / NAVIGATION EXHAUST BODY / FRAME GRAPHICS / SEATS OFFROAD LUGGAGE SNOW BIKE SECURITY HANDLEBARS / CONTROLS LEVERS CABLES FOOTPEGS / FOOT CONTROLS INTAKE / FUEL SYSTEMS AIR FILTERS OIL FILTERS LIGHTING / GAUGES BATTERIES / CHARGERS ELECTRICAL SPARK PLUGS ENGINE PISTONS CLUTCH / DRIVE SUSPENSION / BEARINGS CHAIN SPROCKETS BRAKES PIT BIKE CHINESE VEHICLE PARTS GAS CANS STANDS TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX x X X X X 908 Size CS-Circlip CW-Circlip List 10 mm CW-10 $2.75 12 mm CW-12 $2.75 13 mm CS-13 CW-13 $2.75 14 mm CW-14 $2.75 15 mm CW-15 $2.75 16 mm CW-16 $2.75 16 mm W-6883 $2.75 17 mm CW-17 $2.75 18 mm CW-18 $2.75 19 mm CW-19 $2.75 PISTON CIRCLIPS CW STYLE CS STYLE NOTE: When ordering circlips, be sure you replace with the same type. CS and CW style circlips are not interchangeable. All new Wiseco pistons are supplied with CW style circlips. Size CS-Circlip CW-Circlip List 20 mm CS-20 CW-20 $2.75 20.1mm W-5509 $2.75 21 mm CW-21 $2.75 21 mm CW-28 $4.75 22 mm CS-22 CW-22 $2.75 22 mm W-5590 $3.75 22.89mm W5860 $2.75 23 mm CW-23 $2.75 24 mm CW-24 $2.75 24 mm W-6045 $4.75 Type List Thickness Bore Range Description 2 STROKE RINGS CS $21.95 1mm (.039”) 39-74mm (1.535-2.913”) Alloy steel, ferrox coated, chrome faced, internally notched CST $21.95 1mm (.039”) 54mm (2.126”) Alloy steel, ferrox coated, chrome plated, internally notched CD $43.95 1mm (.039”) 1mm (.039”) 39-74mm (1.535-2.913”) Alloy steel, ferrox coated, chrome plated, internally notched *CDM $43.95 1mm (.039”) 1mm (.039”) 39-73mm (1.535-2.874”) *(for use in chrome bores) Nodular iron, phospate coated, internally notched (for use in Chrome Bores) TC $22.95 1.2mm (.047”) 74.25-91mm (2.923-3.583”) Alloy steel, ferrox coated, chrome plated, internally notched TD $46.95 1.2mm (.047”) 1.2mm (.047”) 74.25-91mm (2.923-3.583”) Alloy steel, ferrox coated, chrome plated, internally notched TDW $46.95 1.2mm (.047”) 1.2mm (.047”) 74.8-81mm (2.945-3.189”) (for 2.04mm knock pin) Alloy steel, ferrox coated, chrome plated, internally notched LK $56.95 2.0mm (.079”) 67.5 - 84mm (2.658 - 3.307) LK ring package contains 1 LT ring and 1 flat ring. The flat ring will be a CS style for bore sizes up to 74mm; TC style for 74.25mm bores and larger KA $21.95 1.5mm (.059”) 55.57-98mm (2.188-3.858”) Alloy steel, ferrox coated, chrome faced, side notched, half-keystone KD $44.95 1.5mm (.059”) 1.5mm (.059”) 55.57-98mm (2.188-3.858”) Alloy steel, ferrox coated, chrome faced, side notched, half-keystone KE $26.95 1.2mm (.047”) 1.2mm (.047”) 65-66.5mm (2.559-2.618”) Alloy steel, ferrox coated, chrome faced, back notched, half keystone KF $44.95 1.2mm (.047”) 1.2mm (.047”) 65-66.5mm (2.559-2.618”) Alloy steel, ferrox coated, chrome faced, internally notched, half keystone 2-STROKE RINGS All Wiseco rings can be used in cast iron, nickel ceramic plating (Nikasil), boron composite, and Electrofusion bores. CAUTION: Unless otherwise noted, Wiseco rings can not be used in chrome plated bores. Engine damage will occur. * CDM rings are designed to be used in chrome bores High Strength, Easy to Install. Two are furnished with every piston. Additional circlips are sold per pair. Order numbers below for replacement. PISTONS
RkJQdWJsaXNoZXIy MTU1NTkwNA==