TRACK KITS WINCH PLOW TOWING / FARM ATV BODY UTV BODY AUDIO / VIDEO / NAVIGATION UTV CAB ACCESSORIES ACCESSORY MOUNTS MIRRORS WINDSHIELDS ROOFS CARGO MANAGEMENT LIGHTING / GAUGES HANDLEBARS / CONTROLS LEVERS / CABLES INTAKE / FUEL SYSTEMS AIR FILTERS OIL FILTERS BATTERIES / CHARGERS ELECTRICAL SPARK PLUGS ENGINE EXHAUST AXLES DRIVE BELTS / CHAINS / SPROCKETS BRAKES SUSPENSION / BEARINGS CHINESE VEHICLE PARTS GAS CANS COVERS / SECURITY TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX x X X X X 537 DIGITAL BATTERY TESTER Description WPS# LIst Digital battery tester 490-9951 $199.95 • Tests cold cranking amps (CCA) on all 12 volt lead acid, lead gel and lithium batteries • Works with powersport and automotive batteries • 2000 CCA test capacity • Shows, voltage, state of charge and state of health of the battery • Adjustable backlight display, can be used in varying light conditions • Also capable of testing most automotive and some powersport vehicle charging systems* • Includes storage case CCA capacity of the battery will need to be known for proper testing, CCA list is included with the instructions. Contact WPS if your powersport battery is not listed. *The primary intention for this tester is to analyze a batteries condition, if it does not analyze a charging systems condition properly, it does not mean that the tester is at fault. 6 AND 12 VOLT BATTERY CHARGER • Converts from 6 to 12 volts at the flick of a switch • Snap-cord style leads • Economically priced 12 VOLT/2 AMP BATTERY CHARGER Charges and maintains all 12 volt lead acid, gel and lithium iron phosphate (LiFePO4)/lithium ion polymer powersport batteries. • CONSTANT CURRENT CHARGE - If the battery voltage is over 10 volts, the charger will deliver a 2 amp charge until the battery reaches 14.2 volts • MAINTENANCE CHARGE - When the battery reaches 14.2 volts, the charger will automatically convert to maintenance mode. The charger will revert to charge mode when the voltage drops below a specified voltage • LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts, the charger will apply a .2 amp charge to recover the battery, once the battery reaches 8 volts, the charger will apply a .5 amp charge, at 10 volts a full 2 amp charge is applied until the battery is fully charged • AUTOMATIC VERIFICATION STAGE - Charger automatically stops charging if the battery does not reach at least 10 volts after 2 hours of charging • SAFETY - Power is not passed thru the charging leads unless they are connected to a battery • LED indicator light shows charging status • Includes heavy duty clamps and fused ring terminal SAE adapter WPS# List 490-9950 $69.95 Description WPS# List Charger 56-1111 $28.95 Replacement Battery Leads 56-1110 $3.75 BATTERIES / CHARGERS
RkJQdWJsaXNoZXIy MTU1NTkwNA==