2021 Tire-Service Catalog

x X X X X 579 FORK CAP WRENCH KTM FORK CAP REMOVER • 22mm hex and 3 /8" square drive • This tool allows removal and replacement of the accessory fork cap KTM part # 48600074S • The tool is slotted to allow removal and replacement of caps with the Micro or Pro Bleeder (see page 862) FORK COMPRESSION VALVE REMOVAL TOOL • For removing the compression valve from CARTRIDGE • 19mm Drive HEX/36mm octagon • Billet 6061 T-6 Aluminum WP SUSPENSION COMPRESSION BOLT REMOVAL TOOL • For removing and installing the compression valve assembly from the fork cap • KTM ‘07-08 SX/SXF, ‘08 XC/XCF, ‘08 690 RFR • 17mm hex head • Made from billet 6061 T-6 aluminum • Orange anodized finish with laser engraving • Made in the USA WPS# List 57-8290 $25.99 WPS# List 57-8373 $14.50 WPS# List 57-8436 $16.50 Description WPS# List 49mm/12mm 57-8429 $22.50 50mm/12mm 57-8428 $22.50 50mm/14mm 57-8706 $27.99 • 49 mm, 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamaha's & Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench) • 50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM's • 12 mm slot for holding the damper rod for removing the rebound bolt., this allows for the removal of the cartridge from the lower fork leg • Made of billet 6061-T6 and anodized Motion Pro blue • Laser engraved markings with Motion Pro logo • Original Motion Pro design WPS# List 634-8370 $39.95 • Linkage bearing grease tool • Allows placing bearing needles on bearing race while greasing linkage bearing • Will fill enough grease on your suspension linkage bearing • Clean linkage grease work with this tool LINK LUBE INJECTOR TOOLS / HARDWARE STREET V-TWIN OFFROAD ATV / UTV TUBES / ACCESSORIES TRAILER LUBRICANTS / CHEMICALS GAS CANS TOOLS / HARDWARE STANDS / LIFTS TRANSPORT / RAMPS PROMOTIONAL REFERENCE INDEX