2020 Snow

x X X X X 887 Auto Tune is another helpful tuning aid. Allows user to program a target O2 map into the module based on throttle position and RPM. When connected and turned on, fueling will self adjust to achieve the target O2 numbers as you ride. We have found the best results are achieved when running at a constant throttle position (the use of a throttle stop is beneficial to keep the throttle po- sition constant). In some areas manual tuning is still mandatory due to other systems that are in place. SLP has initial O2 map recommendations for you to start with. Please inquire for more detailed information specific to your model. AUTO TUNE B y DYNOJET Description SLP# WPS# List Auto Tune 70-126 132-90020 $324.95 Extra Bung and Plug 19-101 132-90095 $13.50 POD-300 DISPLAY B y DYNOJET The POD-300 is an accessory display for Dynojet devices that support DJ- CAN; including the popular Power Commander V, Autotune, WideBand 2, and CMD. Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections. Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you’re just a few clicks away from taking advantage of the many features with it’s easy to use menu system. FEATURES • Real time fuel adjustments • Display channels real time: RPM, TP, Map Position (When using map switch), duty cycle, fuel changes, ignition changes and wideband air/ fuel ratio - (W/WB2 or AutoTune connected) • Weather resistant for use in all conditions. • Log channels saved to internal memory and can be viewed / analyzed with DynoJet’s Powercore Software • High contrast display, viewable in direct sunlight. Description SLP# WPS# List POD-300 Display 70-175 110-70175 $249.95 Description SLP# WPS# List Wideband 2 with POD-300 Display 70-176 110-70176 $529.95 Extra Bung and Plug 19-101 132-90095 $13.50 This wideband O2 gauge is an extremely accurate and capable unit. Complete with it’s own POD-300 Digital Display, it makes precision fuel injection tuning easy. It allows the user to monitor and record O2, throttle position, RPM, and one other 0 to 5 volt analog input such as manifold air pressure, boost pressure, etc. It can be used as a stand alone unit or connected to a Power Commander V (PCV). When connected to a PCV, the injector duty cycle and percent of change can also be monitored and recorded. If desired, with the use of a CAN to CAN cable (PN 70-134) this Wideband 2 can be used as an Autotune unit (refer to the Autotune description below). It has the ability to test the sensor condition at any elevation to ensure the data you are receiving is accurate. This unit is extremely beneficial for precision fuel injection tuning. WIDEBAND 2 WITH POD-300 DISPLAY B y DYNOJET SNOW BIKE SURVIVAL SNOWMOBILE ACCESSORIES HANDLEBARS / CONTROLS WINDSHIELDS BODY TUNNEL SKIS / RUNNERS FRONT SUSPENSION REAR SUSPENSION SHOCKS TRACKS / STUDS SPROCKETS ELECTRICAL EXHAUST ENGINE AIR / FUEL CLUTCHING BELTS BRAKES CHAIN / SPROCKETS CHEMICALS TOOLS / FASTENERS TRAILERS / RAMPS PROMOTIONAL INDEX AIR / FUEL