2018-HardDrive-Catalog

x X X X X WINDSHIELDS / FAIRINGS AUDIO / COMMUNICATION SEATS / LUGGAGE BARS /MIRRORS / CONTROLS EXHAUST AIR / FUELSYSTEMS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL LIGHTING CABLES BRAKES OILFILTERS SUSPENSION BODY WHEELS TIRES / TIREACC. BIKEACC. VICTORY / INDIAN COVERS /LOCKS / TIEDOWNS CHEMICALS TOOLS HELMETS HELMETACC. EYEWEAR APPAREL / RIDERACC. PROMOTIONAL REFERENCE INDEX 627 BACKOFF™ BRAKE HOLD MODULE • The Brake Hold Module connects to your bike’s electronic speed pick-up sensor (will not work with cable driven speedometers); to keep your brake lights on when you release your brakes but are still decelerating • Mode #1: Emits a visual signal of 3 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brake lights are on. Mode #2: Emits a visual signal of 5 quick flashes, followed by a steady on light that remains steady as long as the brake lights are on • 12 volts DC - Maximum Capacity: 10 Amps (normally up to 3 bulbs)! • Compact size. - 2-1/4”L x 1-5/8”W x 5/8”H sealed weather resistant heat sink case. • 1 Year limited warranty • Your Bike MUST have Electronic Pick-Up Sensor for this module to function BACKOFF™ WIG WAG MODULE • The Wig-Wag enables your brake lights to alternate back and forth in a wig-wagging pattern. • This module is specifically designed for use with motorcycle’s that are equipped with 2 brake lights located side by side. • Choice of 2 different modes during installation. • 12 volts DC, Maximum Capacity 10 Amps! • Compact size. - 2-1/4”L x 1-5/8”W x 5/8”H sealed weather resistant heat sink case • Limited Warranty - One Year BACKOFF™ XP • This module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes: • Mode #1: Emits a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. Mode #2: Emits a visual signal of 5 short flashes, followed by a steady on light that remains steady on as long as the brakes are applied • Compact - 2-1/4"L x 1-5/8"W x 5/8"H sealed weather resistant heat sink case • 12 volts DC, 10A max capacity • Limited Warranty - One Year • NOTE: This module is rated at 10 Amps which will only drive 3 - 1156/1157 bulbs. Please DO NOT install any BackOFF Brake Light product on your turn signals, it is illegal and also confusing to following vehicles. WPS# List 28-01020 $64.95 WPS# List 28-01009 $42.95 WPS# List 28-01004 $42.95 LIGHTING