2018-HardDrive-Catalog

x X X X X WINDSHIELDS / FAIRINGS AUDIO / COMMUNICATION SEATS / LUGGAGE BARS /MIRRORS / CONTROLS EXHAUST AIR / FUELSYSTEMS ENGINE TRANSMISSION / DRIVELINE GASKETS / SEALS ELECTRICAL LIGHTING CABLES BRAKES OILFILTERS SUSPENSION BODY WHEELS TIRES / TIREACC. BIKEACC. VICTORY / INDIAN COVERS /LOCKS / TIEDOWNS CHEMICALS TOOLS HELMETS HELMETACC. EYEWEAR APPAREL / RIDERACC. PROMOTIONAL REFERENCE INDEX 157 Forbidden Motorcycles risers feature a 1-1/8" clamping area for MX style bars. They come in 9" and 11" heights and raw or black anodized finishes. The top clamp is a one piece construction for extreme stability and durability. The FM logo is machined into the T 6061 aluminum. The risers are pre-drilled for internal wiring for a super clean assembly, we also offer FM moto bars by Fly Racing with 1" ends for HD controls and pre-drilled holes for internal wiring to bolt directly onto these risers! HANDLEBAR RISERS Description WPS# List FM Risers 9” Raw 825-05000 $239.95 FM Risers 9” Black 825-05001 $259.95 FM Risers 11” Raw 825-05002 $249.95 FM Risers 11” Black 825-05003 $269.95 FM Risers 2” Raw 825-05030 $99.95 FM Risers 2” Black 825-05031 $119.95 RISERS WITH GAUGE MOUNT TABS FM Risers 9” Raw 825-05005 $244.95 FM Risers 9” Black 825-05006 $264.95 FM Risers 11” Raw 825-05007 $254.95 FM Risers 11” Black 825-05008 $274.95 TOP CLAMPS ONLY W/GAUGE MOUNT TABS FM Top Clamp Raw 825-05010 $84.95 FM Top Clamp Black 825-05011 $89.95 Description WPS# List FM Moto Style Bar Black 825-05050 $69.95 FM Moto Style Bar Silver 825-05051 $69.95 FM Moto Style Bar Gold 825-05052 $69.95 FM Moto Style Bar Red 825-05053 $69.95 FOR THROTTLE BY WIRE MODELS FM Moto Style Bar Black 825-05054 $79.95 FM Moto Style Bar Silver 825-05055 $79.95 FM Moto Style Bar Gold 825-05056 $79.95 FM Moto Style Bar Red 825-05057 $79.95 MOTO STYLE BARS WITH 1” ENDS These moto style bars are designed by Forbidden Motorcycles and made by Fly Racing! They feature the moto typical 1-1/8" clamping area but taper down to 1" to accommodate stock Harley hand controls, eliminating the need to sleeve them. They are pre drilled for internal wiring, including the holes to run wires through the FM risers. Bars are 32" wide, pullback is 3" and rise is 2.5" BARS / MIRRORS / CONTROLS